|
|
|
|
|
HO scale type 'D' block signals with operating LEDs.
|
Each head of a type 'D' block signal has different color lights arranged vertically.
Details West 941 General Railway dual head type D signal, HO
• 3 LEDs in each signal head, with individual visors
• Upper head: green, yellow, red
• Lower head: green, yellow, red
• Highly detailed, very accurate model
• Common anode (+) wiring
• Overall height: 2.6 inches (66mm)
• Current limiting resistors included, not attached
|
|
235-941 HO, 3-over-3
Details West photo
|
Details West 942 General Railway dual head type D signal, HO
• 3 LEDs in each signal head, with snow shields
• Upper head: green, yellow, red
• Lower head: green, yellow, red
• Highly detailed, very accurate model
• Common anode (+) wiring
• Overall height: 2.6 inches (66mm)
• Current limiting resistors included, not attached
|
|
235-942 HO, 3-over-3
Details West photo
|
Details West 943 General Railway dual head type D signal, HO
• LEDs with individual visors
• Upper head: green, yellow, red
• Lower head: yellow over red
• Highly detailed, very accurate model
• Common anode (+) wiring
• Overall height: 2.6 inches (66mm)
• Current limiting resistors included, not attached
|
|
235-943 HO, 3-over-2
Details West photo
|
Details West 944 General Railway dual head type D signal, HO
• LEDs with snow shields
• Upper head: green, yellow, red
• Lower head: yellow over red
• Highly detailed, very accurate model
• Common anode (+) wiring
• Overall height: 2.6 inches (66mm)
• Current limiting resistors included, not attached
|
|
235-944 HO, 3-over-2
Details West photo
|
Details West 938 General Railway type D signal, HO
• 3 LEDs - green, yellow, red with individual visors
• Highly detailed, very accurate model
• Common anode (+) wiring
• Overall height: 2.6 inches (66mm)
• Current limiting resistor included, not attached
This 3-light signal can be operated by a TS2 train signal circuit.
|
|
235-938 HO, 3 LEDs
Details West photo
|
Details West 939 General Railway type D signal, HO
• 3 LEDs - green, yellow, red with full snow shield
• Highly detailed, very accurate model
• Common anode (+) wiring
• Overall height: 2.6 inches (66mm)
• Current limiting resistor included, not attached
This 3-light signal can be operated by a TS2 train signal circuit.
|
|
235-939 HO, 3 LEDs
Details West photo
|
Atlas 70000097, 3-over-3 full visor HO, right side
• Dual heads with micro LEDs, green, yellow, red
• for placement on the right hand side of the track
• Finely detailed model of modern signals used throughout North America
• Plastic construction with etched metal details
• Common anode (+) wiring
• Overall height: 3.0 inches (76mm)
• Current limiting resistors are not included
This dual head signal can be operated by a TS3 or TS5 train signal circuit.
Signal wires have two small 4-pin connectors at the end.
For easy connection to these Atlas signals, use our dual Atlas breakout adapter.
|
|
Atlas 70000097 right hand
Atlas photo
|
Atlas 70000096, 3-over-3 full visor HO, left side
• Dual heads with micro LEDs, green, yellow, red
• for placement on the left hand side of the track
• Finely detailed model of modern signals used throughout North America
• Plastic construction with etched metal details
• Common anode (+) wiring
• Overall height: 3.0 inches (76mm)
• Current limiting resistors are not included
This dual head signal can be operated by a TS3 or TS5 train signal circuit.
Signal wires have two small 4-pin connectors at the end.
For easy connection to these Atlas signals, use our dual Atlas breakout adapter.
|
|
Atlas 70000096 left hand
Atlas photo
|
Atlas 70000095, 3-light full visor HO, right side
• Three micro LEDs, green, yellow, red
• for placement on the right hand side of the track
• Finely detailed model of modern signals used throughout North America
• Plastic construction with etched metal details
• Common anode (+) wiring
• Overall height: 3.0 inches (76mm)
• Current limiting resistors are not included
This 3-color signal can be operated by a TSx train signal circuit.
Signal wires have a small 4-pin connector at the end.
For easy connection to these Atlas signals, use our signal breakout adapter.
|
|
|
Atlas 70000095 right hand
Atlas/BLMA photos
|
Atlas 70000094, 3-light full visor HO, left side
• Three micro LEDs, green, yellow, red
• for placement on the left hand side of the track
• Finely detailed model of modern signals used throughout North America
• Plastic construction with etched metal details
• Common anode (+) wiring
• Overall height: 3.0 inches (76mm)
• Current limiting resistors are not included
This 3-color signal can be operated by a TSx train signal circuits.
Signal wires have a small 4-pin connector at the end.
For easy connection to these Atlas signals, use our signal breakout adapter.
|
|
|
Atlas 70000094 left hand
Atlas/BLMA photos
|
Atlas 70000146, 3-color bi-directional type D HO signal
• Three micro LEDs, green, yellow, red in each head
• for placement on the right or left side of the track
• A detailed model of modern signals used throughout North America
• Plastic construction with etched metal details
• Common anode (+) wiring
• Overall height: 3.0 inches (76mm)
• Current limiting resistors are not included
Operate as an intermediate block signal on a single track using a TS2 train signal circuit,
or control two signals on a double-track using a TS5 train signal circuit
Signal wires have two small 4-pin connectors at the end.
For easy connection to these Atlas signals, use our dual signal breakout adapter.
|
|
70000146 bi-directional
Atlas photo
|
NJ International 1037 short bi-directional 'D' type block signal, HO
• Dual type 'D' heads with snow shields
• 3 LEDs each side - green, yellow, red
• Common anode (+) wiring
• Overall height: 2.1 inches (53mm)
• Current limiting resistors are included
This 3-light signal can be operated in both directions by a
TS2 train signal circuit. Click here for details.
|
|
NJI 1037 short dual block signal
|
NJ International 1038 bi-directional 'D' type block signal, HO
• Dual type 'D' heads with snow shield
• 3 LEDs each side - green, yellow, red
• Common anode (+) wiring
• Overall height: 3.8 inches (97mm)
• Current limiting resistors are included
This 3-light signal can be operated in both directions by a
TS2 train signal circuit. Click here for details.
|
|
NJI 1038 dual block signal, NJI photo
|
NJ International 1072 house/mast 3-over-2 block signal, HO
• Type 'D' two heads with snow shields
• Upper head - green, yellow, red
• Lower head - green over red
• Modern design with equipment cabinet, ladders and platforms
• Common anode (+) wiring
• Overall height: 3.5 inches (89mm)
• Current limiting resistors are attached
This dual head signal can be operated at a turnout by TS3 and TS5 train signal circuits.
|
|
NJI 1072 house/mast signal
|
NJ International 1071 house/mast 3-light block signal, HO
• Type 'D' head with snow shield
• 3 LEDs - green, yellow, red
• Modern design with equipment cabinet, ladders and platform
• Common anode (+) wiring
• Overall height: 3.5 inches (89mm)
• Current limiting resistors are attached
This 3-light signal can be operated by TSx train signal circuits.
|
|
NJI 1071 house/mast signal
|
© copyright 2009-2023 Azatrax LLC, Longmont, Colorado
|
|
